INSUWRAP PVC 2000 L

Single ply PVC waterproofing membrane for covered pond lining.

Lining Solutions, Pond Lining

Insuwrap PVC 2000 L is a calendered extruded high polymer waterproofing membrane, thickness 2.00 mm, manufactured following highest International standards offering high physical properties and long term durability.

Thickness: 2.00mm

Standards Compliance: ASTM D 4551: Class 40

Product Features

  • Use as a water containment membrane for water structures, such as pond lining, lakes, and septic tanks.
  • High physical properties and long term durability.
  • A loose-laid application does not require any priming.
  • Self-extinguishing material is safe in case of fire.
  • Premium elongation, and premium physical properties.
  • Extended durability during the lifespan, with high retention properties after aging and exposure to service conditions.
Proudly Made in Saudi

Proudly Made in Saudi

Very Low Emission

Very Low Emission

Environmentally Safe

Environmentally Safe

Easy to Apply

Easy to Apply

Application Instructions

Surface Preparation

Internal concrete surface should be smooth, clean and free from sharp projections otherwise a protection layer (non-woven polyester 140 g/m2) must be used to receive PVC membranes.

Apply INSUWRAP PVC 2000 L (2.0mm thick) lining membrane over the geotextile. For upper fastening of the membrane, excavate a circular trench around the basin (about 40cm wide and 30cm deep). Extend the membrane to the trench and fully anchor it using sand or concrete. Weld the membranes with 50mm overlaps by using hot air welding techniques. Dress all pipes and drains with the membrane as per manufacturer recommendations.

Downloads

Explore More Products

INSUWRAP INSURBOND 106

Water base one-component adhesive with very strong adhesion properties on all normally occurring substrates and to be used for bonding Insuwrap PVC waterproofing membranes to concrete, cement plaster & metal sheets; where required

INSUWRAP INSURBOND 106 S

One-component adhesive with very strong adhesion properties on all normally occurring substrates and to be used for bonding Insuwrap PVC waterproofing membranes to concrete, cement plaster & metal sheets; where required.

INSUWRAP INSURBOX CEP145

Plastic end box for protecting PU control tube or re-injection grouting tube in basement and tunnel waterproof system

INSUWRAP INSURBOX REP150

A plastic end box for protecting re-injection grouting tube in basement and tunnel waterproofing system

INSUWRAP INSURDISK R100

Plastic discs for temporary and spot fixation of PVC waterproofing membrane in under- ground waterproofing (100 mm diameter).
Need assistance? Feel free to contact us!

Need assistance? Feel free to contact us!

About

We are professional and reliable provider since we offer customers the most powerful and beautiful themes. Besides, we always catch the latest technology and adapt to follow world’s new trends to deliver the best themes to the market.

Contact info

logo

Saudi Arabia’s Leading PVC Waterproofing Manufacturer.

  • 2nd Industrial Area P.O.Box 17579, Riyadh 11494 Kingdom Of Saudi Arabia
  • [email protected]
  • 966 11 498 0332