INSUWRAP PVC 2000 WM

Single ply PVC waterproofing membrane for covered roofing systems.

Roofing Solutions, Covered Roofing

Insuwrap PVC 2000 WM is a calendered extruded high polymer waterproofing membrane, (thickness 2.00 mm), manufactured following highest International standards offering high physical properties and long term durability.

Thickness: 2.00mm

Standards Compliance: ASTM D 4434 - Type 2

Product Features

  • Used for a covered waterproofing system.
  • A loose-laid application does not require any priming.
  • Self-extinguishing material is safe in case of fire.
  • Premium elongation, and premium physical properties.
  • Extended durability during the lifespan, with high retention properties after aging and exposure to service conditions.
Proudly Made in Saudi

Proudly Made in Saudi

Very Low Emission

Very Low Emission

Environmentally Safe

Environmentally Safe

Easy to Apply

Easy to Apply

Application Instructions

Surface Preparation

Sloping screed will be installed over concrete deck. The screed can be sand cement or lightweight concrete. Separation layer of Polyethylene (minimum 150 micron) will be installed over the sloping screed if the concrete surface is not smooth enough to receive the waterproofing membrane over it. Another similar separation layer can be installed over the waterproofing membrane before installation of thermal insulation according to its type.

The overlaps of PVC membranes (2000 WM) should be a minimum of 50 mm welded with hot air guns. As much as practically possible the joints will not be against the direction of flow. It will be loose laid on the horizontal surface, extended, and bonded to vertical up-stands with Insurbond-106 contact adhesive up to a minimum of 30mm, and then fixed with aluminum holding metal strip or washers on the vertical up-stands.

Insuwrap PVC waterproofing membrane 2000 WM (2.00mm thick) will be bonded to up-stands using Insurbond-106 contact adhesive and terminated with aluminum flashing and sealant.

Downloads

Explore More Products

INSUWRAP INSURBOND 106

Water base one-component adhesive with very strong adhesion properties on all normally occurring substrates and to be used for bonding Insuwrap PVC waterproofing membranes to concrete, cement plaster & metal sheets; where required

INSUWRAP INSURBOND 106 S

One-component adhesive with very strong adhesion properties on all normally occurring substrates and to be used for bonding Insuwrap PVC waterproofing membranes to concrete, cement plaster & metal sheets; where required.

INSUWRAP INSURBOX CEP145

Plastic end box for protecting PU control tube or re-injection grouting tube in basement and tunnel waterproof system

INSUWRAP INSURBOX REP150

A plastic end box for protecting re-injection grouting tube in basement and tunnel waterproofing system

INSUWRAP INSURDISK R100

Plastic discs for temporary and spot fixation of PVC waterproofing membrane in under- ground waterproofing (100 mm diameter).
Need assistance? Feel free to contact us!

Need assistance? Feel free to contact us!

About

We are professional and reliable provider since we offer customers the most powerful and beautiful themes. Besides, we always catch the latest technology and adapt to follow world’s new trends to deliver the best themes to the market.

Contact info

logo

Saudi Arabia’s Leading PVC Waterproofing Manufacturer.

  • 2nd Industrial Area P.O.Box 17579, Riyadh 11494 Kingdom Of Saudi Arabia
  • [email protected]
  • 966 11 498 0332